| 型 號: | |
| 所屬分類: | 美國SKC大氣采樣泵 |
| 報 價: | ![]() |
意大利SKC Biolite微動物采樣系統泵
一技之長運作:
zui大流速Maximum flow rate: 30.5 litre/min;
背壓流速:Maximum back pressure: 800mbar;
尺寸:Dimensions: W x H x D 162 x 209 x 338mm;
分量:Weight: 6.05kg;
防護品級Enclosure rating - IP20
操縱溫度Operating temperature: 0°C to +40°C
操縱濕度Operating humidity: 0 to 95% Rh
電壓Mains supply: 220/230V ~ 50Hz
電流Maximum input current: 0.66A
樂音Operating noise level: 67 - 71dBA @ 1metre
找尋有一個最合適的外接外接24v供電插口,在泵脊背拔下外接外接24v供電接入IEC外接外接24v供電,型號規格為:英國的3針和2歐引腳外接外接24v供電引線,區分合理插口。
翻閱訪問量條理器,*逆時針商標目的性以保證 它是*開園的,其后翻閱24v電源按鈕開關。
攤開泵的開/關,使泵運行業務五~極為鐘改變前一天每流量數據標定,關機重啟,打擊泵。
翻起泵的控制開關。如若巧用國內視頻留量數據條理器目前條理國內視頻留量數據。翻起國內視頻留量數據條理器順時針方向和逆時針變低活動內容率不斷增強國內視頻留量數據。使泵正常運轉五小時,國內視頻留量數據未變在應用每精確度讀數。當所要的國內視頻留量數據已定,國內視頻留量數據條理器能夠用擰緊螺母擰緊。
背經濟燃氣壓力表做出一款 ,這位唆使的SKC BioSampler精準操作r走到吸15in汞音速。
Insert the mains lead into the IEC mains inlet at the rear of the pump and plug the lead into a suitable mains outlet socket. Both UK 3 pin and Euro 2 pin mains leads are supplied with the unit, select the correct lead for your location.
Turn the flow adjuster fully counter-clockwise to ensure that it is fully open. Switch on the mains supply.
Switch on the pump using the on/off switch at the rear of the pump. Allow the pump to run for five to ten minutes to stabilise before commencing any flow calibration. Switch the pump off using the on/off switch at the rear of the pump.
Connect the sample train to the pump inlet hosetail. Switch on the pump using the on/off switch. Adjust the flow rate if required using the flow adjuster. Turn the flow adjuster clockwise to reduce the flow rate and anti-clockwise to increase the flow rate. Allow the pump to run for five minutes for the flow rate to stabilise before taking any calibration readings. When the desired flow rate has been set, the flow adjuster can be locked using the locking nut.
The back pressure gauge gives a reading of the suction generated by the pump due to the restriction to flow of the sample train. This is important for indicating correct operation of the SKC Biosampler - the Biosampler achieves sonic flow at a suction of 15in Hg (refer to the Biosampler instructions for further details).
意大利SKC具有著出眾的試樣泵,如AIRCHEK2000美SKC,進級版airchek touch,通用的泵和XR5000氣味監測泵,提供了*思想道德的選擇室和房產查測分析儀器傳奇裝備。它是經過了的過程 專業化、縝密和安穩的辦事效率搞定為的客戶建造更大價值。
| 相干同類產物: |